1 Iodoadamantane

The golden leopard is also used for a wide range of purposes.
The first one can be used for guarding. The golden leopard is strong, powerful, and brave by nature. If it is large, it can be placed in a key place, a house, and a city. Its prestige is enough to retreat small houses in the night, to protect the territory and the people. The ancient grand house, many of which are kept to guard the house, so that they and their families can be safe.
The second one can be used for conquest. The golden leopard can be used as a force. Its running is like a horse, and it can quickly break into the wall. With its claws and sharp teeth, it can be severely beaten by the people. With the help of this method, it can achieve great power, increase strength, and make people intimidated.
In addition, its skin and bones are also wonderfully used. The skin of the golden leopard is very good, and it can be made into armor, which can resist the damage of knives and arrows. Its bones can be used well, and it has the effect of strengthening tendons and bones, and relieving pain. Therefore, the golden leopard is a martial art to seek armor and help the body, and it can be used to treat diseases.
In this case, the golden leopard, because of its special ability and characteristics, plays an important role in guarding, conquering and killing, etc., and is valued by the world.

"Tiangong Kaiwu" states that iron is steel. In ancient times, the so-called iron was combined with iron, and the method was not the same.
First, the method of pouring steel. The pig iron and wrought iron are placed in the same furnace, the pig iron is first melted, infiltrated into the wrought iron, and folded and forged several times to make the iron fuse with each other, remove impurities, and obtain iron. Pig iron has a high carbon content, but wrought iron has a low carbon content. Through this process, the carbon content is uniform, and the hardness and toughness of the iron are excellent. As the book says: "Make a thin sheet of wrought iron as wide as the finger, about half an inch long, wrap the tip tightly with iron sheets, place the pig iron on it, cover it with broken grass, and coat it with mud. When the firepower is up, the raw steel will melt first, and the wrought iron will be leached into the wrought iron, and the two feelings will be combined. Take out and add a hammer, then refine and hammer again, and so on. "
Second, the method of frying steel. First heat the pig iron to a semi-molten state, and stir fry it in the blast to oxidize the carbon in the pig iron, reduce the carbon content, and gradually turn into steel. After proper treatment, the iron can be obtained. This process requires grasping the heat and the frying time. If the heat is too high, the iron will be too soft, and if the heat is not enough, the carbon content will be too high, and the texture will be brittle and hard.
Third, the hundred-smelting steel method. Using block ironmaking as raw material, it is repeatedly heated, folded and forged to remove impurities, refine Each forging makes the iron more dense and uniform, and after a hundred or more forging, the final result is iron. The so-called "thousand tempering", the impurities of the iron are gradually removed during repeated tempering, the performance is getting better, the edge is sharp, and the sword body is tough.
The production of iron is complicated, and all methods require the exquisite skills and careful control of craftsmen to achieve excellent iron, which is used in the production of weapons, utensils, etc. It is an important material in ancient times.

"Arsenic stone is arsenic, and its color is red or white, or like peach blossoms, so it is called arsenic. If it is sulphur, copper, or iron, it can be melted." Today, iron, iron, is the genus of fine iron, and its quality is tough and abnormal. Compared with iron, arsenic has very different physical properties.
Arsenic is toxic to the extreme. Its dryness, if eaten by mistake, people will suffer from gastrointestinal cramps, damage to their organs, and their lives will be in danger. As for things, they can be destroyed when touched, such as metals, which are gradually corroded and damage their shape.
Iron is not the case, its texture is hard, tough but not broken. With its casting tool, the edge is sharp, and iron can be cut like mud, and it will not be dull after long-term use. Although iron is of the genus iron, it has been specially tempered to remove all impurities, so it is pure and strong. It is wear-resistant, not afraid of wind and rain erosion, and can be preserved for a long time without losing its quality.
When iron encounters arsenic, the corrosive properties of arsenic may slightly damage the appearance of iron, but iron is tough and cannot be easily destroyed. The rigidity of iron and the poison of arsenic are obviously different in material properties. Iron can be used to forge sharp blades and utensils to help civilian and military use; while arsenic can only be used as a poison agent, not a good thing.

Cast swords are made of steel. During storage and transportation, many precautions need to be paid attention to in detail.
When storing, the first environment is heavy. The warehouse should be dry and ventilated to avoid moisture and waterproof to prevent steel from rusting. Moisture, like bone-rotting maggots, can quietly erode iron, causing damage to its texture. If the warehouse is humid and the water vapor is dense, even hard steel cannot resist the disease of corrosion. And it should be avoided to coexist in a room with corrosive substances such as acids and alkalis. Such substances will corrode when exposed to steel, such as burning wood in a fire, which can destroy its quality in an instant.
Furthermore, the stacking is orderly. Steel objects, whether long or short, square or round, should be stacked in categories. The long material should be placed smoothly, and the short material can be stacked, but it should not be too high to prevent dumping and damage. And between the stacks, there should be passages for inspection and handling.
When transporting, safety comes first. Loading must be stable and tied with ropes to prevent it from shaking and slipping on the way. The road is rough and the vehicle is bumpy. If it is not fixed firmly, the steel will shift, which will damage the body in light, and endanger the safety of pedestrians and vehicles in heavy.
Protection is also indispensable. Open-air transportation, when covered with tarpaulin, is protected from wind and rain erosion. Under the scorching sun, the steel will heat up, and it will encounter rain suddenly. Hot and cold, which is prone to hidden dangers. And the means of transportation should be clean and free of debris residue to avoid polluting the steel.
You also need to pay attention to the weather changes on the way. When the rainstorm is approaching, look for shelter quickly; when the heat is hot and hot, pay attention to the expansion of steel. Only in storage and transportation, be careful and pay attention everywhere, so that the steel of the sword can be guaranteed, and the quality will not be damaged, and it will arrive safely.

In today's world, the prospect of the market situation of gold-cast steel monkeys is quite promising. The gold-cast steel monkeys, with their unique quality and exquisite art, are gradually emerging in the city.
Looking at the past, the rise of gold-cast steel monkeys began when skilled craftsmen cast their shapes with fine gold, endowed their gods with wonderful methods, and made the image of the spirit monkey come to life. At first, it was only favored by the niche, but it gradually became famous for its exquisite craftsmanship, both shape and spirit.
In the current city, the audience of gold-cast steel monkeys is gradually widening. One is that because of its artistic beauty, it is placed in the hall, which can add brilliance to the elegant room, so it is favored by many elegant scholars to decorate their homes and show their taste. Second, it contains the meaning of auspiciousness, the monkey, "Hou" also, has the meaning of a prince, symbolizing auspiciousness and wealth, so it is valued by merchants, officials and other people who seek good luck and blessing, and often make a good choice for gifts.
Therefore, the city is gradually booming, and the demand is also on the rise. There are more and more manufacturers, and there are many workshops, but there are also advantages and disadvantages. Those who are good, strictly abide by the craftsmanship, choose excellent materials, and cast gold steel monkeys of high quality. Although the price is high, there is no shortage of people who are interested; those who are not good, try to be shoddy, seek quick profits, resulting in poor quality and bad market style.
As for the future scene, if we can maintain integrity and innovation, improve craftsmanship, and improve materials, and the regulation of the city is orderly, so that the bad and the good are eliminated, the city of gold steel monkeys will be prosperous for a long time. And as the people live a prosperous life and pursue greater prosperity in art and auspicious things, the market prospect can be expected to be bright. However, if we do not focus on quality and disorderly competition, we may also lead to the decline of the city. Therefore, when ingenuity is the foundation and norms are the guide, the city of gold steel monkeys can prosper in the long run.